2017年3月14日 · The benefit of the gear drive is there are no chains or tensioners to fail. The downside is the lash can stress the crank bearings. A lot of bikes built with chain drives don't …

2017年5月10日 · If the crank is turning clockwise, a geared drive would turn the rear cam counterclockwise, but a chain would drive it in the same rotation as the crank. With gears on …

Cam lifts and durations for gear drive cams are shown on page 3 of this document. Gear drive cams and chain drive cams are not interchangeable even though timing specifications are the …

2011年5月11日 · the gear drive frees up TONS of friction from the stock chain,tensoner set up.gear drive`s are by far the best thing to ever happen to TC motors

2014年3月14日 · The 509 will be a better bottom end cams. Why change from gear back to chain? Unless you have all of the original chain drive parts, it will cost more. Gear drive vs …

2024年9月3日 · Changing the drive sprockets is actually changing the final drive (comparable to changing the gearing in the differential of a car). But people don't seem to realize that the final …

2013年1月17日 · People have found their tensioners have lasted much longer after being replaced once, due to the chain being polished, and less friction against the tensioner material. …

2024年12月2日 · I am planning to install a chain drive conversion kit on my 2007 Softail Springer. I was wondering if there was a certain company that everyone would recommend?

2006年10月24日 · I am planning to change cam chain to gears with 510G S&S gear driven cams on my Road King with stock engine. No plans for big bore kits. I have got 28k on the king. Any …

2013年4月3日 · You can put a 30 t sprocket on the transmission, and get a final ratio in between the stock 1200 and 883. The 30 tooth is a stock Japanese model sprocket. It works with a …