2009年4月13日 · First experience with a Meyer plow/system. I turn the touch pad on and the red light above the word "overload" lights up. I started checking grounds, and wiring but snapped the ground wire off the motor....so when I get that fixed anyone have some advice for my next step??

2009年11月15日 · Hi . Having a problem with a meyer e-60 plow i have . Bought the plow used and not hooked up and did not see it work . Tested it off the truck and pump and motor worked and angled left and right so i figured ok should be ok . Well got it all on the truck plow would angle left and right and it would lift the plow up a little off the ground and then drop right back down . …

2009年12月10日 · The plow would drift down slowly, i found there was a bad o ring on the bottom of the ram. Very easy job to fix. Troubleshooting guide says to check the a-valve o rings first. Everything was fine on the a-valve, Next is to check the seal cup and o-ring on the ram. And thats where the problem was!! I hope this info can help somebody.

2015年1月5日 · So I was able to get it in a heated garage. I left it there in the up position and went out plowing in a different truck. Came back about an hour later to the plow sitting in the ground. Cycled it up and down a few times getting faster every time. Took out the filters and found some ice pellets inside. Guess its time to drain it again. Ugh.

2020年12月11日 · My family and I have been running Meyer plows for the last 62 years. My father started his plow business back in 1958 with a Willys Jeep and a Meyer plow. I myself have been running two mid 90's 7.5' Meyer plows with wings on our trucks. I just keep fixing and keeping them going. I'm not spending $8000 for the newest greatest wide-out.

2000年12月15日 · My Meyer E-60 lifts my blade just fine but won't hold it there. I just bought this unit used so I'm trying to get it up and running. It immediately drops the blade after releasing my 'up' switch. It is not a slow (leaking down) kind of drop either. It drops pretty quickly as if my 'A-valve' is stuck in the 'open' position. Is there any way to confirm this? I've ordered a new 'A …

2008年11月2日 · You should probably write a book "Meyers plow troubleshooting for DUMMIES" I am sure it would be a bestseller. And yes the one pump that I was rebuilding is for my brother and it has a sticker on the front that says Meyers E-60 Electrotouch.

2009年2月13日 · so i just replaced my sump base (meyers) and motor (aftermarket). now although i havent set the pressure i cant get blade to come up. left and right works fine. pump raises without blade. lowers fine without blade with me pushing down on it and someone else hiting slick stick down. i know im supposed to set pressure but shouldnt i be able to get it …

2020年12月6日 · Meyer E60 Intermitted problem. Sometimes works with no problems (seems to be when warmer out) Last week it worked great. Today, different story It went up and very slow to one side then stopped, Wont go up or down or side to …

2004年12月24日 · Ok guys,I'm new to plowing this is my 1st season doing it.So far i've replaced the C valve and a line due to the pump not going to the right.Now my new problem is that when i lift the plow up it starts to fall down immeditaly.I put new fluid in it and still nothing.So i took the plow off and ran the pump to the up position,and it stays up,i lock it in the down position and …