2022年3月26日 · I bought a KVM switch (Greathtek GHT-S7212H2-U2 115$ from amazon) with 2 HDMI input and 4 HDMI outputs (for dual monitors). So far seems like its working. I had to get a converter for the webcam from USBC to USBA. I bought an DVI to HDMI converter for my computers second display output.

2009年12月28日 · The outside monitors were the primary monitor for each system, holding the task bar and menus. I did not use Synergy. Rather I used the keyboard and mouse attached to the kvm switch. Each machine also had an additional mouse attached, so that I could affect the machine when the kvm switch was pointed at the other machine.

2024年2月12日 · Adapter works when connected directly to PC but now when using KVM, an illustration of the setup can be seen here: with red indicating the non working connection path. The adapter is DP to HDMI. K...

2009年8月13日 · I had a long and frustrating experience trying to get multi-monitor KVM to work properly. Here's a synopsis of my experiences: I've ended up using two HP LP2065 monitors that have two DVI inputs and an old Belkin PS/2 KVM switch for the keyboard and mouse. The system still loses track of the keyboard and mouse occasionally.

2020年12月13日 · Switch monitor on; Monitor detects DP immediately and shows it; The KVM is a bit slow in general and a few seconds later it connects the monitor with the PC via HDMI. HDMI has some protocol to make monitors detect it and so the monitor switches (first blinking) DP is higher prio than HDMI so it switches back. (second blinking)

2021年4月7日 · The KVM firmware is programmed to know that some graphics cards support dual mode (DP++) and send HDMI signal through the DP++ port when HDMI monitors are detected. Hence, DP++ -> KVM -> DVI works because KVM passes through incoming HDMI signal to DVI monitor. Exotic case involving a DP->DVI converter is apparently not considered by Depzol KVM.

If your computers could share a video card, then it could switch what goes out to the monitors, but they don't. So, I see three answers, none of which hit your real question of software KVM. 1) hardware KVM - At work, I use the K&M of an IOGear KVM that does fine for me. Just double-tap the scroll lock and you're onto the other source.

2015年10月24日 · The dual-monitor KVM switches I've looked at don't support using different types of cables. They're either all analog or all digital, so I need all digital. – oscilatingcretin

2019年5月24日 · I'm currently looking for a KVM that supports two monitors with a resolution of 2560 × 1440 and has DDM or at least Semi-DDM for input devices. DVI ist not an option, even if Dual-Layer is supported, as one of the connected devices will be a laptop with only USB-C and that cannot reasonably converted into dual-layer DVI.

2019年11月20日 · KVM switch has 3 VGA ports, 2 for PC1 and PC2 and the other for console. I also have two laptops that are on docking stations. For instance lets say i'm trying to get Laptop 1 to display on 2 monitors and if I wanted to, once I hit the switch, have Laptop 2 to display on 1 monitor and have Laptop 1 display on the other?