2022年11月20日 · Yeah, so generally in VEX, the faster something spins, the more friction it will have. Small imperfections in the shaft/bearings will be much more pronounced at higher speeds. In this case, the 12t gear will be sandwiched between two 36t gears. Because of this 600 rpm 3:1 ratio, the 12t gear will be spinning at 1800 rpm.

2021年3月25日 · Getting the right speed for a drivetrain can be pretty tricky, so I made a list of all the possible output rpms that could be achieved with only two gears. This includes the 24 and 48 tooth gears available in the vExplorer kit and from VEX IQ, and the custom 1200 and 3600rpm cartridges that VEXU teams are able to make. Vex Gear Ratios - Google Sheets

2024年11月16日 · Gears are one of the primary sources of power transmission in VEX. We offer a variety of both normal and high strength gears, that come in a multitude of shapes and sizes. Start with a simple project like building a gear reduction, and work your way...

2024年12月17日 · Our team is just starting out, and we are using a six wheeled drivetrain, with Omni wheels on the outside and traction wheels on the inside, powered by 4 200 rpm motors. All 3 wheels on each side are connected by gears, would regular ones work for this? Because we are slightly low on space and it would be a hassle to refit it for HS gears.

2011年5月12日 · Our team was building a claw for the past week, but encountered the gears were skipping. To fix this problem we decided to change the gears to HS ones. This sort of helped, but the problem continued. The next thing we tested was adding free spinning gears to sandwich the other gears that were skipping. This reduced skipping, but it still occurs. In general how can …

2023年10月3日 · Hybrid Gears are a combination spur gear and bevel gear that we first released in the new VEX GO kits. What makes these unique, is that you can mesh any size Hybrid Gear with any other Hybrid Gear in both spur and bevel use cases. But, yes, @Sidoti did a great job explaining hybrid gears!

2015年10月6日 · HS gears have more mass, therefore slower acceleration. In reality it would be negligible, but there is definitely no way that HS gears themselves create faster accelerations. 3.)When we had the low strength gears, we often burned out. This is …

2017年2月20日 · Hello, This is my claw and i would like to link all the gears together via gears to have the claw open and close symmetrically while leaving the space between the two motors and the gears linked to the motors. I know i need to use an even number of gears to have each side of the claw open or close to the right side. But the problem is, i can’t use 10 (12 teeth …

2007年5月29日 · Note, the “worm-wheels” that are designed to mate with the “worm-gears” typically have slanted teeth. These slanted teeth form a good interface with the worm, regardless of worm-wheel diameter. The Vex Advanced gear kit includes a …

2017年1月24日 · Bevel gears are simply meant to allow 2 gears, mounted at right angles, to mesh. They change the direction of the motion, but as vex iq bevel gears are all 18-tooth gears, they do not really help with gear ratio by themselves. Bevel gears, however, are very useful in differential gears.