How to Repair a Hot Tub Water Pipe

Small Snake Slithers out of Tub Jet

Hey Hot Tub Owners! Here are two easy tricks to fix your hot tub jets if they’re not working. First, make sure your jets are open all the way. Most jets are adjustable, so turn them all the way to the open position. Secondly, try burping your jets. If you’ve just refilled your hot tub, you probably have an AIR LOCK inside your pipes. You can get the air out of your jets by running the jets on low for 20 seconds and then high for 20 seconds. Do this a few times to get the air out of your system.

Replacing a broken tub diverter . #HandsomeOrHandy #HomeMaintenance #PropertyMaintenance #Plumbing | Anthony Reimnitz

Hey Hot Tub Owners! Can’t get your hot tub to heat up? The problem might not be the heater. It could actually be your filter. Low water flow can cause your heater to stop working properly. And low flow can be caused by a dirty filter. So before calling in a professional, remove and clean your filter to rule out a flow rate problem. Then, make sure the water level in your hot tub is high enough. Finally, make sure there are no closed valves and there’s nothing blocking your drain covers. Hopefull

Got a new hot tub? Here are 3 things you must do before starting it up for the first time #1. Watch out for antifreeze. New hot tubs come with antifreeze in the lines to protect it in colder temperatures. Use a hose to spray water directly into each jet to clean the antifreeze. Or fill the tub, circulate the water through the pump for several minutes, then drain completely before refilling. #2. Use the filter well. Put your hose inside the filter well when filling up your hot tub with water. Thi